Get Furnace Maintenance and Tune-up before the winter!

furnace installation calgary

Get Furnace Maintenance and Tune-up before the winter!

It’s time to turn on your furnace as winter approaches and the temperature drops below 18°-10 C. The ideal home temperature for winter is above 15 degrees to achieve the best seasonal home comfort. Let’s be honest, the warmer, the better. However, before getting your furnace started for the first time, there are a few things you should do to make sure it’s ready for the winter temperatures. So, make sure your furnace is in good working order. 

Our Furnace Maintenace experts will make sure your furnace is prepared for the winter 

  • Check to see if the furnace engine is running smoothly. 
  • Check what type of oil should be used to keep the furnace engine lubricated. 
  • Test the ignitor in the furnace to ensure it is working properly. 
  • Examine the exhaust fan on the furnace. 
  • Clean the condensate drain on your gas furnace. 
  • Know how to check for carbon monoxide in your home. 
  • Set the thermostat to the winter setting. 
  • Invest in a thorough duct cleaning for your furnace. 

Know how often you should replace your furnace filter. 

For homeowners, this is a very simple and inexpensive task. Simply turn off your furnace, remove the filter from the blower, and clean it as needed. 

This is something you should perform at least once every three months, not just when your furnace first turns on. 

Is a furnace tune-up cost-effective? 

Your furnace should be tuned up once per year, ideally before you use it for the first time. 

A furnace tune-up will give you peace of mind that your furnace is ready for whatever the winter may bring. It will also improve the efficiency of your furnace, which means you won’t have to worry as much about inefficient winter electricity costs, It will also prevent any unexpected failures. 

Our highly trained professionals can perform a comprehensive furnace tune-up and walk you through the process step by step. This way, you can go into the winter with a properly operating furnace! Give us a call at Rapid Furnace Repair to have it tuned up! 


3 Indicators of Furnace Repair Service

Yearly furnace inspections will give you peace of mind

3 Indicators of Furnace Repair Service

The furnace in your home is something you may n0ot think about much until it breaks down, but it is still very important. If your furnace isn’t working properly, it could have a big impact on your home, especially during the cold winter months when you really need it. 

Table of Content 

  • Overview 
  • Age 
  • Weird Noises 
  • You See the Wrong Color 

So, if you’re looking for furnace service in Calgary, don’t wait. Instead, get furnace repair as quickly as possible from a legitimate company like Rapid Furnace Repair. You don’t want a major repair to turn into a minor one. 

How do you know whether your furnace requires maintenance? You should be aware of a few key warning signs that indicate whether your furnace needs to be repaired. 


A furnace has an average lifespan of 18 years, but, like an older automobile, if it sees more usage than the typical house, it will need repairs sooner or later. Also, just like an older automobile with a lot of miles on it, your furnace will require more maintenance after it reaches the age of 15 years. It’s especially true if the furnace has had to be repaired several times in recent years. 

When you spend a lot of money on repairs, much like when you buy a car, you want to make sure they work well because if they don’t, you’re either supporting a dying entity or even causing more difficulties. If you don’t get your furnace serviced as quickly as you’d like, you’ll find that buying a new furnace is less expensive than continuing to maintain your old one. So, proceed with caution. 

You’ll prolong the life of your furnace in addition to improving its overall quality by having it serviced and maintained properly. You’ll also save a lot of money due to the reduced need for future maintenance and greater energy efficiency. 

Weird Noises 

It is a red sign if the furnace makes strange noises like rattling, slamming, or popping. If you hear a noise and your furnace is blowing chilly air, contact your HVAC professional immediately. 

You must address these concerns as early as you can since they might be harmful. For example, noise and chilly air might alert you that your furnace is about to shut down, leaving you without heat or, worse, bursting, causing property damage and personal injury. Contact a professional right away to get an evaluation of the repairs that are required. You should not live in your house until the problem is resolved, depending on the situation. 

You See the Wrong Colors 

The flame in the furnace should be blue rather than yellow. The fuel isn’t burning properly or efficiently if the flame is yellow. Worse, it could mean your furnace is emitting carbon monoxide, putting your family’s health at risk. 

If the flame isn’t blue, whether it’s yellow or not, you’ve got a severe problem. Carbon monoxide poisoning and gas leaks are both dangerous. Playing games or messing around in any form is not a good idea. Simply leave your home, and your gas will turn off right away. Before you return your house, have an HVAC specialist inspect the furnace to see what has to do to fix it. 

It’s not worth endangering your life to save a few bucks. Because it’s vital to hire a furnace repairman you’ve evaluated and can trust, you should take the safe way and have the repairs advised to you. 


How to Use Your HRV System Throughout the Year

How to Use Your HRV System Throughout the Year

How to Use Your HRV System Throughout the Year

Keeping Your Home Comfy 

Winter’s approaching, and when it arrives in Calgary, you’re going to feel it. If somebody leaves a door open too long, everyone in the house will know. Windows, doors, and any other area where heat could escape are to be kept closed and this is no time to delay your water heater repair. The same is true in the height of summer: you keep everything buttoned up so the cold won’t get out. 

Ultimately, you’re looking to design a sort of “microclimate” in your home that you maintain: you circulate air internally as needed. Finding a reliable water heater is recommended, but you’ve got to keep such heaters maintained, and that could mean simultaneously securing water heater repair in Calgary. Regardless of how you go about it, here we’ll explore some best practices in managing the internal atmosphere of your home. 

HRV Best Practices in Fall or Winter 

HRV stands for “Heating Recovery Ventilator”. During fall and winter, HRV systems provide homeowners with diverse and effective control of internal air quality. Excess moisture can be removed so window condensation is no longer an issue, and unwanted odours can also be eliminated. There are a few ways to manage your HRV system for best results, avoiding the need for water heater repair in Calgary. 

First, assure systems are set between 25% and 50% in accordance with exterior temperatures to manage condensation. 50% represents maximum relative humidity indoors if exterior temperatures are between -11 C and 18 C. Humidity levels should be around 25% when exterior temperatures are -30 C or less. 

Spring and Summer HRV Use 

When things get hot, and the thermometer reads 18 C or higher consistently, it’s a good idea to set the system at 100%. Otherwise, to keep internal temperatures comfortable and reduce the need for water heater repair in Calgary, at such temperatures it’s often recommendable to simply turn the system off. Should things start to smell or get stuffy, then that’s the time to turn HRV back on–also, assure you activate the bathroom fan. 

Final Considerations 

Sometimes, you’ll need water heater repair in Calgary even if you’re doing everything right. Alternatively, you might be able to go years without an issue regardless of how you use HRV technology. Still, even in such situations, you’ll want to have interval checkups. To keep your home’s climate control systems at their best, please do not hesitate to call Rapid Furnace Repair; we’re here to help!


Yearly Furnace Inspections Will Give You Peace Of Mind

Yearly furnace inspections will give you peace of mind

Yearly furnace inspections will give you peace of mind

When the cool fall temperatures begin, you want to know your furnace is ready and able to keep you and your family warm. Furnace maintenance is critical to maintaining your HVAC system so you are not ‘left out in the cold’ this winter. Your furnace is one of the most significant investments you will have in your home. Even though you may only use it for a few months out of the year, it’s still a good idea to ensure it is well-maintained. With an annual furnace inspection, you will ensure that your unit is in good working order and that it is running as efficiently as possible. 

Save Money with an Annual Furnace Inspection 

Having your furnace inspected every year will save you money. The inspector will uncover potential problems before they become significant problems that could cost you thousands of dollars in repairs. In addition, a qualified inspector will be able to notice even the faintest signs of wear and tear on parts that could eventually lead to a breakdown. 

Keeps the Furnace Working Reliably 

A furnace is an investment. By having regular maintenance performed on this system by professional furnace technicians, you extend the life of the HVAC system and get more money out of your unit. It also ensures the system continues to work reliably and you are kept warm during the cold winter months ahead. 

Keep Your Home Carbon Monoxide Free 

Another powerful reason for having your furnace inspected is that it will show any signs of carbon monoxide build-up in your home. Carbon monoxide is a dangerous gas. It has no smell and cannot be seen. There are air quality tests. However, that can be performed to show any possible leaks when it comes to carbon monoxide or radon gases. If you have a gas furnace, tests can also be performed to determine if natural gas is present. 

When you are ready to have your annual furnace inspection performed, call the professionals at Rapid Furnace Repair. With our many years of experience, we can provide you with a thorough inspection you can rely on. Your furnace will be thoroughly checked, and you will have the peace of mind you need that you will be nice and warm all winter long. Don’t wait until a furnace repair is required. Call and schedule your annual inspection now! 


5 Important Things to Consider When Buying a New Furnace


5 important things to consider when buying a new furnace

Furnaces will eventually break down and cease to operate. They can usually be fixed, but if your furnace needs replacement, you may find yourself looking for a new one and not knowing where to begin. Here are a few things to consider when buying a new furnace. First, the appropriate Furnace Installation is critical. After all, a furnace that hasn’t been appropriately installed can be dangerous, and it can put your home’s furnace and heating system at risk, resulting in more expensive repairs down the road. As a result, it’s advised that you engage an HVAC professional to assist you with installing new furnaces. 


Different furnaces will cost different amounts. Furthermore, it would be best if you considered the expense of getting a new furnace and the cost of hiring a professional to install it. Some businesses will charge an excessive amount for their services. When it comes to calculating quotes, at Rapid Furnace Repair, we want to make sure your furnace is the proper size for your home and that it operates at peak efficiency. Our mission is to deliver excellent service at a reasonable cost. 


The size of a furnace is essential for ensuring comfort. While it’s understandable that bigger furnaces cost more than smaller ones, you want to be sure your house is adequately heated. Therefore, our professionals will visit your home and determine the appropriate furnace size for your home. After that, we’ll consider everything and provide you with a competitive quote. 


Most furnaces are covered by a warranty. That means that if certain parts fail during the first few years, you’ll be eligible for repairs within a specific time frame. 

Air quality: 

Another element to consider is the quality of the air you breathe. When you buy a new furnace, the air is distributed throughout your home by a fan blower. For better air quality, the furnace will come with a filter that must get replaced every few months. Cleaning your furnace and replacing the filter with a fresh one will help your heating system work more efficiently. 


Some furnaces are inefficient, especially if your home has an older one. So, if you’re in the market for a new furnace, choose a high-efficiency one. You’ll likely save money on your gas bill for years to come if you do so. Another advantage is that more efficient furnaces are frequently eligible for government rebates. 

We have years of experience installing and repairing furnaces, as well as heating, ventilation, and air conditioning (HVAC) systems at Rapid Furnace Repair Plumbing and Heating. Our experts are certified and licensed, so you can rest assured that your equipment is in good hands whether you buy a new furnace or repair your current one. Please do not hesitate to contact us! 


To extend your Furnace lifespan, invest in Furnace Maintenance

Furnace Repair Calgary

To extend your Furnace lifespan, invest in Furnace Maintenance

Proper maintenance helps to extend a furnace’s lifespan. Calgary homeowners can prolong a unit’s life by as much as five years when they perform yearly furnace maintenance. Plus, you can be more confident that your furnace will perform as expected when you need it. This is crucial in the harsh Calgary winter. 

The Three Major Benefits of Regular Furnace Maintenance  

Furnace maintenance in Calgary shouldn’t be forgotten. It’s essential to have your furnace inspected by professionals at least once a year. While you can help your furnace by keeping it clean and using it with care, most maintenance tasks require special tools and skills.  

The three significant benefits of regular furnace maintenance make it well worth your time:  

Low utility Costs  

As the furnace ages, it becomes less efficient and draws more electricity for its regular operations. This can double or triple the annual cost of ownership. With standard furnace maintenance, Calgary residents have the chance to turn back the clock on their unit and ensure it runs at peak efficiency. This also means that it will reach your desired temperature faster, and you can run it for shorter periods.  

Improved Safety  

Modern furnaces are much safer than old-fashioned ones, but there is always a risk of fire that you must consider. Filters should also be replaced, and the internal mechanisms of the furnace cleaned out, so debris and waste products don’t build up. Only a professional can ensure a thorough job. Even if you have not used your furnace in months, it can still be affected by contaminants that may catch fire.  

No Costly Repairs  

As with any piece of mechanical equipment, the odds of a severe furnace problem go up with time. During the furnace maintenance process, a qualified technician can diagnose issues before they become serious. A quick adjustment to your furnace now may save you from hundreds of dollars in repairs or replacement costs down the line.  

Prolong the Lifespan of Your Furnace with Regular Maintenance  

Luckily, an experienced team of professionals is available right in your area at Rapid Furnace Repair. We will be glad to help you extend the life of your home furnace, no matter what model or brand it may be.  

Call Rapid Furnace Repair if you need furnace maintenance in Calgary! 


What are the Advantages of Professional Water Heater Repair?


What are the Advantages of Professional Water Heater Repair?

For everyday comfort and convenience, hot water is a must in the house. In addition, you depend on the water heater for activities like cooking, cleaning, and bathing; if it’s inefficient or irregular, it can make it harder to do these chores, disrupting your daily schedule and increasing your monthly electricity bills.   

Table of Content 

  • Overview  
  • Lower energy and water bills  
  • Consistent and high-quality hot water  
  • Convenience and peace of mind  

Professional water heating system repair is a wise, cost-effective decision that will benefit your house today. 

Lower Energy and Water Bills 

A poorly maintained water heater will not work as efficiently as one that is well-kept. If your water heater requires repairs, cleaning, or other maintenance, it will struggle to provide the hot water you need when you turn on the faucet. It means you’re more likely to run the water for longer to attain the desired temperature, wasting water and increasing your water costs. Your energy costs will also increase because your water heater utilizes more energy to accomplish your desired outcomes. Professional water heating system installation is a one-time expense that will save you money in the long run since your water heater will use less energy and heat faster, resulting in less waste.  

Consistent and High-Quality Hot Water 

A broken water heater can’t keep up with your everyday demands. For example, you could notice that the hot water is uneven, making bathing and cleaning difficult or uncomfortable. Additionally, a dirty water heater with considerable mineral deposits affecting the tank or heating element may transfer part of that buildup along with the hot water to your faucet, resulting in rusty, metallic-tasting, or odorous hot water. Your water heater repair service can quickly resolve these difficulties, allowing you to resume bathing and cleaning with consistent, clean hot water.  

Convenience and Peace of Mind 

It is complex and time-consuming to repair a water heater on your own, and faulty repairs can be dangerous if gas lines are mishandled. As a result, professional water heater repair gives you the convenience of delegating the work to a professional, enabling you to focus your time and effort elsewhere and the satisfaction that comes with knowing the repairs will go through safely and correctly. Furthermore, trusting a plumbing company with your water heater repair requirements allows you to take advantage of their service guarantee. In addition, it covers the work in the event of a problem, so you won’t have to pay additional costs to resolve  

issues if they occur later.  

Professional water heater repair by a furnace repairman is the most effective approach to ensure that your home’s water heating system delivers the results you desire. Visit our website to learn more about our water heater services and products in your region, such as water heater maintenance, repair, and new system installation, to ensure that you have the hot water you require every day.


Six Commons Reasons Your Furnace Is Not Working

There are several indicators that your heater isn’t working correctly. Of course, the safest method to set your furnace is to hire a professional furnace repair service. Some of them, though, maybe rectified with a bit of elbow grease. So, keep your home warm and comfy with these troubleshooting suggestions.  

If none of the following suggestions help, you should seek advice from a professional as soon as possible (or type furnace repair Calgary on google). If you’re seeking a professional in Calgary, call us (Rapid Furnace Repair) at 403-998-3405.  

Six things to check & identify the reason your furnace stops working.  

1. Check the temperature setting on the thermostat   

Ensure it’s not the thermostat before you think your furnace isn’t operating. You will not be getting the indication that it’s time to switch on if your thermostat has a low battery or is wrongly set. Replace the batteries to check whether the problem corrects. 

2. Switches, breaker panels, and the pilot light should make all check.  

If it isn’t the thermostat, examine the circuit breaker to see if a circuit has a trigger. Switch it back on if that’s the case. By switching on the furnace, you can test if it works. If the breaker breaks again, call for help. Otherwise, you could find yourself in a situation where the system is overwhelmed. If it doesn’t work, make sure the furnace switch turns to the “on” position. Also, ensure the pilot light on your furnace is turned on.  

3. Examine the Gas Line  

Next, check the gas line in your home. Pull the lever to “open” the gas line if it is not already. If it configures to open, it is not an issue.  

4. Examine the Vents  

Examine the air intake and exhaust vents to check if something is blocking them. For example, even though the furnace is in good working order, the house may not get heat. Likewise, always be sure a piece of furniture isn’t blocking a vent.  

5. Test the Filters in the furnace  

The furnace filters must be kept clean and free of debris at all times. If you don’t, they’ll rapidly clog, causing your furnace to break down. In addition, the heat exchanger can quickly overheat and force the furnace to shut down if warm air cannot flow through blockages. Replace or clean the furnace filters and check them at least once a month. Make sure the furnace and thermostat turn off before dealing with the filters.  

6. Verify that the furnace’s electricity turns on.  

Sometimes gas systems require electricity to operate. As a result, a power cutoff switch locates next to the furnace. First, make sure the fuse/circuit breaker for the stove is not broke in the electrical panel. Next, make sure the power switch next to the furnace turns on.  


Hiring a furnace repairman is the best solution if your furnace is not adjusting to your repairs or if a part needs replacement. If your furnace breaks down, a trained specialist will know what to do. They’ll be able to detect and repair the problem correctly, as well as to conduct an inspection of your HVAC system and offer recommendations on how to maintain your heating and cooling systems working for as long as possible.  

Contact the experts at Rapid Furnace Repair now for more information about what to do if your furnace breaks down, or schedule an appointment with a repair technician.  


6 Common Winter HVAC Problems

HVAC Repair Service

6 Common Winter HVAC Problems ​

The winter may be the most highly dynamic environment of the year, or the Winter Wonderland, as the lyrics say, but it may be hard on your HVAC system. Common HVAC issues may cause chaos in your house, requiring expensive repairs from a furnace repairman or just making it too chilly to live in!   

Table of Content-  
  • Introduction  
  • Dirty Air Filters  
  • Uneven Heating  
  • Broken Thermostat  
  • Heat Pump Won’t Turn On  
  • Frozen Pipes  
  • Pilot Light Problems  
  • Conclusion  

Fortunately, to avoid the most frequent issues, keep a close eye out for such warning signals so you can be sure your HVAC system will warm you up during the long winter evenings. 

Dirty Air Filters

A dirty air filter may be at fault if you notice reduced airflow or air that doesn’t heat properly. Dirty air filters may quickly collect dirt and grime, restricting airflow and putting additional pressure on your heating and cooling systems. Changing your filter on a routine basis is the simplest method to avoid this. Set a calendar reminder once a month to extend the system’s life and maintain optimal airflow. Make sure each of your air vents has been open on a more fundamental level!  

Uneven Heating

You’re probably dealing with uneven heating if certain parts of your home never warm up, no matter how high the thermostat is. These are around windows or doors that allow chilly winter airflow or drafts that cause your heating system to lose its balance. If you believe this is true, you may need to have professional maintenance done on your ductwork to ensure that it remains in excellent working condition. 

Broken Thermostat

Thermostat malfunctions are common. The majority of the time, it’s a simple remedy. However, thermostats must be re-calibrated regularly, which may be a problem. A broken thermostat may also be due to bad wiring, and occasionally it’s simply the batteries! A damaged or defective thermostat may easily create temperature swings in your house, which can cost you money in the form of electric or gas bills. Still, thankfully, there’s nothing amiss with your HVAC system- only the control system! 

Heat Pump Won’t Turn On

When the temperature lowers, the heat pump in your system may not be able to keep up. The fans and coils within your outdoor unit must be free of ice, or they will freeze, and sooner or later, you will, too! Heat pumps often fail to defrost throughout the winter, resulting in frost layers that ultimately cause a failure. That’s why it’s essential to get your system inspected by qualified HVAC professionals before the winter arrives. This is avoidable, but once it’s frozen solid, it’s much more difficult to repair! 

Frozen Pipes

When your HVAC coils freeze, the pressure causes them to break, causing floods or damage. If this occurs, you’ll want to cut off your water and call for help right away! 

Pilot Light Problems

When the pilot light is on, some heaters will only slightly ignite. For easy access to the heating system, keep the blue flame burning at all times. If you notice that it isn’t burning brightly enough, you’ll probably also realize that your house is freezing! A dirty or broken flame sensor is the most common cause of a pilot light issue. To discard such an option, it’s a good idea to clean the sensor first. If the problem continues, you should seek expert help!  


Throughout the winter, there’s nothing nicer than a warm home! But, on the other hand, heating issues may transform your home into an ice castle in no time! So, keep an eye on your heating unit for heating system repair throughout the year. So, you can stay warm throughout the winter as Rapid Furnace Repair is here to help! 


What are 4 Common Boiler Repairs?


What are 4 Common Boiler Repairs?

A boiler is a complex mechanical device. Despite this, it is a model that requires little heating system maintenance. One of the best things about a boiler is how long it lasts and how little maintenance it requires. That’s why it’s understandable if you’re astonished when your boiler breaks down, but it’s going to happen at some point.  

Table of Content:  
  • Introduction  
  • Kettling  
  • Leaking and Dripping  
  • Pilot Troubles  
  • No Heat  
  • Wrap Up  

Consider some of the issues you can face if you possess a boiler rather than a forced-air heating system like a furnace. (Apart from their ignition mechanisms, these are two entirely different systems.) It’s vital to know what to expect, but it’s even better to understand that performing regular maintenance work on your home is a good idea.  


Kettling is a typical issue with hot water boilers. If you’re unfamiliar with the phrase, you may be familiar with the sound it makes: a loud pounding or rumbling from the heating unit. If this applies to your heater, but you haven’t had a specialist look at it yet, now is the time. Unfortunately, this issue has the potential to grow into a far more significant problem than it is today.  

The problem is due to an excess of minerals in the water supply. Hard water is normal in our location. However, the mineral deposits in the tank modify the pressure levels with time. As a result, a kettling boiler is more likely to leak or have unsafe amounts of carbon monoxide, putting your household at risk. 

Leaking and Dripping

When a boiler begins to leak, another typical boiler repair issue often comes to us as an emergency call. If the leak is coming directly from the boiler tank, you’re dealing with a significant problem. The boiler has most likely rusted through and will need replacement. A pressure relief valve or a pump, on the other hand, might cause a leak, which we can fix. We’ve even found that sometimes a suspected leak was a condensation! 

Pilot Troubles

The pilot light isn’t as bright as it formerly was. Previously, you had to start the pilot light and leave it running all day and night to ensure that heat was always available. Some boilers still use this technology today, while others rely on electrical ignition to heat water only when required. You’ll need heating professionals to assess pilot and ignition system difficulties if you can’t ignite a pilot light on your own. 

No Heat

When we get a call about a boiler that isn’t working, we never know what we’ll find. While the issue may be related to ignition, there are other possibilities to explore. For example, it’s possible that a safety switch prevents the boiler from remaining lit, that a pump is malfunctioning, or that you have a defective thermostat.  

There’s no need to try to figure out what’s wrong on your own. For repairs, contact a trained specialist for boiler repair service. To minimize costly repairs, have your local experts do maintenance once a year.