You might be having a problem with your heating system in the middle of winter, and that’s never something you want to deal with. Here, we’re covering four of the most common heating problems homeowners experience during the winter, brought to you by our experts in furnace repair here in Calgary, Rapid Furnace Repair.
Furnace Doesn’t Ignite
When you turn your furnace on, it should activate when the thermostat’s set temperature is reached. Once your thermostat relays the temperature to the ignition system, then the burners start, and the heating process starts. But if you have an issue with the ignition system, then chances are that your home isn’t going to be heated the way that it needs.
There are several reasons why your furnace might not be igniting properly. Most of the problems require that you call in a professional furnace repair technician, as DIY solutions are too dangerous for homeowners to attempt themselves.
Furnace Causing a Burning Smell
Now, when you first turn your furnace on, there might be a burning smell as it burns off the small amount of dust that’s accumulated within the system. But if that smell persists beyond the first couple of hours, then it could be caused by dirty air filters, wiring issues, or an overheated motor.
Check your air filter to ensure it’s clean and doesn’t need to be replaced. If your air filter is fine or changing it doesn’t help with the smell, then you need to shut your furnace down and call in a professional furnace repair technician.
Your Furnace is Short Cycling
On average, your furnace should cycle for approximately 10 to 15 minutes each time you start it. Now, if your furnace has developed the habit of turning off after a few minutes or even seconds, then it’s doing what’s known as “short cycling.” There are a couple of solutions to the problem, but all require calling in a furnace repair technician – sometimes, the only solution is to replace your furnace entirely.
Abnormally High Heating Bills
If you notice that your heating bill has spiked abnormally this winter season, then it’s an indication that your furnace isn’t operating at peak efficiency. Sometimes, you might have a problem with your thermostat or dirty air filters, both of which are relatively easy fixes. But you could also have a problem with the ductwork in your home, which requires that you have a furnace repair technician come out to inspect your system and find where the problems are.
If you’re noticing problems with your furnace, then you need to make a call to your local furnace repair technician. For the best service and technicians, trust Rapid Furnace Repair. Give us a call today!